Indoor LightingSlim Panel · LN-PNL-6060
Slim Panel 600
Ultra-slim 595 × 595 mm LED panel for uniform, low-glare office ceilings.
- Power
- 30–40 W
- Flux
- 3,300–4,600 lm
- CCT
- 3,000–6,500 K
- IP
- IP40
Solution
LED Retrofit Programmes
Replace legacy fixtures with efficient LED luminaires, zone by zone.
Overview
A structured retrofit replaces conventional sources with LED luminaires matched to each area. A phased approach spreads investment and limits disruption.
Typically specified with: Industrial Lighting, Indoor Lighting.
- 01Lower connected load
- LED luminaires reduce installed power for the same task illumination.
- 02Reduced maintenance
- Long-life sources lower replacement frequency.
- 03Improved visual quality
- Modern optics improve uniformity and glare control.
Method
A clear path from brief to result.
Every project follows a transparent sequence so assumptions and outcomes can be reviewed.
- Step 1
Survey
Record existing fixtures, mounting heights and operating hours.
- Step 2
Specify
Match luminaires and controls to each area and standard.
- Step 3
Implement
Phase installation to limit disruption to operations.
Where it applies
Environments this solution supports.
Application
Industrial Warehouses
High-output lighting for racking aisles, loading docks and tall buildings.
Application
Commercial Offices
Glare-controlled, uniform lighting for focused and comfortable workplaces.
Application
Industrial Facilities
Durable lighting for production lines, plant rooms and washdown areas.
Recommended products
Luminaires that suit this solution.
Illustrative sample products. Final recommendations depend on your project requirements.
Indoor Lighting
Indoor LightingDeep Cone · LN-DWN-170
Deep Cone Downlight
Recessed anti-glare downlight with a deep reflector for corridors and lobbies.
- Power
- 12–24 W
- Flux
- 1,200–2,500 lm
- CCT
- 3,000–4,000 K
- IP
- IP44
Industrial LightingHigh Bay · LN-HBY-200
Industrial High Bay
High-output round high bay for warehouses and production halls.
- Power
- 100–200 W
- Flux
- 15,000–29,000 lm
- CCT
- 4,000–5,000 K
- IP
- IP65
Industrial LightingTri-Proof · LN-TPR-1500
Tri-Proof Batten 1500
Vapour-tight batten for car parks, plant rooms and washdown areas.
- Power
- 36–60 W
- Flux
- 4,600–7,800 lm
- CCT
- 4,000–6,500 K
- IP
- IP65
Start a project
Talk to us about this solution.
Tell us about your site and objectives. We will respond with a suitable approach and product recommendations.